Our Internal Stock # 3-F3-1 (10-22-18 dale)
You are about to purchase the following item: 1 - Tsudakoma 8-3/4" Twin 4th & 5th Axis NC Tilting / Rotary Table Unit, TTNC-201-2
Multiple spindle tilting rotary table for high production 4th & 5th axis machining. This table is suitable for simultaneous machining of multiple work pieces with complex shapes or five faces.
Serial # 610466
4TH & 5TH AXIS TILTING / ROTARY TABLES
8-3/4" Dia. Table (Face Plate)
Table diameter mm 225
Tilt Range -110° ~ +110°
Minimum table center distance 304.8
Table height at 0° position (w/ face plate) mm 350
Center height at 90° position mm 260
Nose Diameter (w/ face plate) mm 40H7
Thru Diameter mm 32
Table T-slot width (w/ face plate) 12H7
Guide block width 18h7
Servo Motors (Fanuc)*
Rotary: Alpha 8i
Tilt: Alpha 12i
Maximum Motor Speed rpm: 4,000
Speed Reduction Ratio:
Maximum Table Speed rpm:
Inertia converted into motor shaft x 10-3kg.m2:
Clamp torque @72psi [500 psi] Nm (ft. lbs.)
Rotary:  [(361)]
Tilt: [2,450] [(1,806)]
Indexing accuracy arc sec.
Indexing repeatability arc sec.
Tilting accuracy arc sec.
Tilting repeatability arc sec.
Net Weight kg (lbs.) 550 (1,210)
Allowable wheel torque - rotary Nm (ft. lbs.) 470 (346)
Allowable work inertia kg.m2: 0.63
Allowable work weight
0° tilt angle Kg (lbs) 50 (110)
0° ~ 90° tilt angle kg (lbs) 50 (110)
Allowable work moment Nm (ft. lbs.) 254.8 (187.8)
Allowable load when table clamped N (lbf) 9,800 (2,195)
Nm (ft. lbs.) 490 (361)
Nm (ft. lbs.) 2,450 (1,806)
16" Between Centers of Tables (Approx)
Table Drive Motor:
Fanuc AC Servo Motor
# A06B-0123-B576 #7008
Weight - 1225 lbs (w/ Skid - 1265 lbs)
Overall Dimensions - 43-1/2" x 11-1/2" x 7-1/4"
Made in Japan
This unit was taken Directly from Working Service. Is Being Sold in GOOD WORKING Condition.
Full 30 Day Return Policy if Found Defective (Freight Prepaid by Buyer).
Due to some items having multiple quantities, Pictures may be representative of your item. To see a picture of the ACTUAL item you will be receiving, please email us and we will promptly send you a picture of your specific item.